Sunday, August 25, 2019

Explain the advantages and disadvantages of starting a business from Essay - 1

Explain the advantages and disadvantages of starting a business from scratch, franchises, and existing businesses - Essay Example s include the freedom to implement one’s ideas to a large extent, aligning the investment and resource mobilization with market conditions rather than committing to rigid plans, and ease of entry and exit with minimum dependence on outsiders (Longenecker et al, 2011, pp.104-133). Disadvantages include high risk of venture failure due to lack of previous experience, making a wrong choice of product/service, and longer time needed to achieve physical and financial goals. Outright purchasing of an existing business denotes a medium risk and gives assured customer base and revenues from the start. This advantage is diluted if the unit has poor reputation for quality or ethical practices. While the experienced staff is an advantage, if there are unresolved industrial relations problems, the new owner has to solve them, which is not always easy. Also, it may not always be possible to identify hidden liabilities representing additional risks, which accrue to the new owner (ibid.). Taking out a franchise is a minimum risk option for new entrepreneurs since it provides the advantages of a new unit as well as a running business model. On the minus side, one has to depend on the parent company for all major decisions besides committing to pay initial fees and royalties. Profitability is reduced as a result of these limitations. One of IFA’s best features is the listing of several franchise options, complete with the preliminary information for analysis, negotiations and decision making. I have considered the option of Expedia ®CruiseShip Sales Center Franchise from IFA’s website for analysis (Franchise opportunities, IFA, 2012). This is an established company with a strong brand image and 150 franchises. With an initial investment of $9500 and total investment of up to $20,000, this business is within my reach (ExpediaFranchise, 2012). The business is related to travel and vacation for which the demand has always been good. Further, a franchisee can start operations

Saturday, August 24, 2019

Control Process in Management Research Paper Example | Topics and Well Written Essays - 500 words

Control Process in Management - Research Paper Example The control process, in this case, can be described by use of the following steps; first, the management of united airlines makes establishes plans (Morden 156). In this cases, the united airline have a committee that is composed of members from the entire department in the organization. The committee is charged with the responsibility of formulating plans for the organizations. The committee formulates plans and set standards to achieve the objectives. The plan formulated by the committee must define the expected results and how results will be verified. Second, measurement of performance actual performance; in this case the management of united airlines measures the actual productivity obtain and this through the various method of performance appraisal. For example, in the year 2007, the actual sales from online booking ticket was 213,456 tickets. The organization a clear method of gathering and reporting tickets sold during the period.  The third step is comparing the actual performance achieved with the standards. This step compares the actual performance with the set standards, in this case, the managers of united airlines determine whether any deviations from the set standards are. In this steps the variation between the actual results and the set standard are determined. In the fourth step, the manager determines the action that should be taken where there are deviations from the set standards. This step is known as the† Take corrective actions† the manager determines the changes that should be taken if there is a ny, and how to implement those changes.

Friday, August 23, 2019

Economics Essay Example | Topics and Well Written Essays - 1500 words - 5

Economics - Essay Example The works by Prebisch (1947; 1949) and Singher (1950) attempted to explain economic growth based on the differences in products produced by different nations. The less developed nations according to these theories have to purchase the manufactured goods from the Northern nations at prices in excess of what of what they get for selling their primary goods (to the Northern nations). This ultimately adversely affects the economic growth of the less developed nations and thus they remain less developed (Todaro, 2003). These theories thus argue for promoting import-substituting policies for economic growth. Alternative theories by Harrod (1939) and advanced by Kregel (1980) capture the dynamics of economic growth by assuming that it is determined endogenously by the saving and investment decisions of firms. In this model, the growth rates put forward are actual, warranted and natural growth rates. Based on this approach, the long run growth rate is determined by the closed economy social saving rate rather than net exports. However, this model has been criticised for showing the possibility of unstable growth in a capitalist economy (Moudud, 2000). It has been shown that though there can be instability to some extent for the growth path, its extent is restricted by many endogenous factors in a capitalist economy (Moudud, 2000). 3. Conclusion In this essay, the discussion shows that low savings rate alone cannot explain the differences between developed and developing nations. By improving saving rates alone, developing nations cannot catch up with the West. Many other factors discussed above determine the differences between these nations. 1. Introduction The relationship between free trade and economic growth has been a topic of debate for the academicians and policy makers in the recent years. In this essay, the arguments for and against free trade are discussed. 2. Arguments for and Against Free Trade Greater availability of cheaper goods from abroad will lower t he domestic price level, since the consumption bundle used to compute broad inflation measures includes imported goods. The magnitude of this effect depends on the share of imports in the consumption bundle of the representative household.Also as the economy opens up the shocks to the price level due to the domestic farm sector; output fluctuations are likely to ease which may diminish the price fluctuations (Jin, 2000 etc). As per the Dutch disease hypothesis (Collier and Gunning, 1999) and the political economy models (Alesina and Perotti, 1994), trade openness can affect fiscal deficits through the instability of government revenue. First, countries with an outward-looking strategy have higher levels of competition, are less corrupt (Ades and Di Tella, 1999) and have higher fiscal balances and lower fiscal deficit. Second, trade openness increases income inequalities which enhances the demand of public goods (Alesina and Perotti, 1994) and, simultaneously, reduces the ability of governments to collect taxes. Third, trade policy could reduce government revenue in the short run (Bean, 1999), which could occur when increases in openness result from a reduction in tariffs. However, for a given level of tariffs, government revenue from taxes is an increasing function of trade openness. Thus, in the

Thursday, August 22, 2019

Gospel Essentials Essay Example | Topics and Well Written Essays - 1250 words

Gospel Essentials - Essay Example In the previous epochs He was thought to be the center of the Universe and literally everything was revolving around Him. With this regard one should also dwell on some characteristics that are attributed to God Who is perceived as â€Å"a being conceived as the perfect, omnipotent, omniscient originator and ruler of the universe, the principal object of faith and worship in monotheistic religions† (God, 2011). Indeed, one of the major aspects that should be mentioned in particular is His perfection: no other being in the Universe can be as perfect. God is also regarded as the Creator of everything (DiVincenzo, 2012). It is quite obvious that everything that exists in the world was created by Him. Prior to the beginning of all things, nothing existed but God. The process of creation is explained in detailed in the book of Genesis. Keeping this in mind, one might ask a legitimate question: if everything was created by God, is evil, death, suffering and other negative aspects of life created by Him as well? According to free will theodicy, it was, but for the purpose of greater good. Speaking of human nature, one should note two important aspects. On the one hand, it must be said that just like all other beings, humans were created; however, â€Å"God created mankind in His own image† (Genesis 1:27). On the other hand, due because Adam and Eve committed the Original Sin, they could no longer live in Eden. There are many opinions about purpose of human life. While some people suggest that there is not distinct purpose since life should be perceived as the greatest gift that a person can receive, others point out that humans were created to praise the Lord. That is why the purpose of the human life is to love the Creator and follow the guidelines that were designed by Him. If people chose not to do so, this causes a considerable number of problems in their lives. Indeed, when humans forget about God and focus on the visible world, with all its

Cognitive Behavioral Theory Essay Example for Free

Cognitive Behavioral Theory Essay Cognitive behavioral therapy (CBT) is a short-term, problem-centered therapy that is used to address psychopathology within the individual (Beck, 1995). This model of therapy is used to address issues of depression, anxiety, eating disorders, relational problems, and drug abuse, and can be utilized when working with individuals, as well as within group and family modalities. The core aspects of this therapy include collaboration and participation by the client, a strong alliance between therapist and client, and an initial focus on current problems and functioning (Beck, 1995). The theory of CBT emphasizes the relationship between the individual’s thoughts feelings and behaviors, which is seen as being the underlying cause of psychopathology in individuals. Therefore, this theory asserts that the identification, evaluation, and modification of one’s negative thoughts will lead to an improvement in one’s mood and behaviors (Beck, 1995). It is important to understand the concepts and theory from which CBT is based in order for it to be efficiently implemented in therapeutic work with individuals, groups, or families. While CBT is used to treat psychological disorders, this theory can be examined by looking at the thoughts, feelings, and behaviors of individual’s with an absence of psychopathology. Beck (1979) and Beck (1995) present the cognitive model in order to explain the theory of CBT. The cognitive model demonstrates that the emotions that an individual experiences and the behaviors that they exhibit are a result of their perception of a situation or event (Beck, 1995). When in any given situation, an individual’s immediate thought response is their automatic thought (Beck, 1995). These thoughts are an immediate evaluation of the situation, which in turn directly influence the feeling that a person has about the situation. Automatic thoughts are experienced by everyone and occur in the individual’s mind prior to reasoning. These thoughts occur swiftly and often times the individual may be unaware that they have occurred, being more observant of the emotion that they are feeling in the moment (Beck, 1995). Once an automatic thought occurs within the individual, it triggers a feeling, which in turn triggers the individual’s response, such as a behavior and/or physiological response. For example, after a young child begins to pick up his blocks to be put away, his mother rubs him on the back and gives him praise for his actions. His automatic thought may be, â€Å"I am good when I put away blocks,† triggering a feeling of confidence, an increased level of physical energy, and the behavior of putting away the remaining blocks. Automatic thoughts can be neutral, positive, or negative. We all have our own automatic thoughts as we move through our day-to-day lives and interact with others. In regards to individuals with psychological disorders, the cognitive model looks at how negative thoughts influence the individual’s feelings and behaviors (Beck, 1995). From a CBT lens, it is the negative automatic thoughts that an individual has that perpetuate symptoms of psychological disorders, the occurrence of negative mood, uncomfortable physiological responses, and maladaptive or inappropriate behaviors (Beck, 1995). While we all have moments of experiencing negative automatic thoughts, for those with psychological disorders, and more pervasive difficulties in living, negative thoughts are often experienced in situations that are neutral, producing negative feelings that lead to maladaptive behaviors or responses that would not typically be expected from the neutral situation (Beck, 1995). Aaron Beck presents theory of the cognitive model of how depression is rooted and perpetuated in individuals as a result of the interaction between negative automatic thoughts, feelings, and behavioral response. In this discussion, depression is conceptualized in terms of the cognitive triad, which describes three components of negative thinking of the depressed individual: the individual’s negative view of self, their negative view of the others and the world, and their negative view of the future (Beck, Rush, Shaw, Emery, 1979). The cognitive triad is maintained via the remaining components of Beck’s cognitive model of depression, the individual’s schemas, or core beliefs, and the utilization of faulty thinking, or cognitive errors (Beck, Rush, Shaw, Emery, 1979). Cognitive theory asserts that our automatic thoughts are rooted in our core belief system or cognitive schemas. Core beliefs begin to be developed early in life and are based on experiences that the individual has throughout their life. Because these beliefs are so grounded in how the individual views their life, others, and the world, and begin to be cultivated so early in development, they become a fundamental aspect of the individual, who considers them to be absolute truths (Beck, 1995). Core beliefs are deeply rooted in an individual, so much so that the individual may be unaware of the belief and how it influences their thoughts about themselves and the world. Each belief can have varying levels of presence within an individual’s day to day life, with some core beliefs remaining predominately dormant and only being activated in certain situations, while others may be frequently present in an individual’s thoughts (Beck, 1995). It is the individual’s cognitive schemas that allows for the categorization and evaluation of different experiences or situations (Beck, Rush, Shaw, and Emery, 1979). The core belief system maintains the way an individual experiences and thinks about a given situation (Beck, Rush, Shaw, Emery, 1979). While everyone conceptualizes a given situation in their own way, each individual typically conceptualizes similar situations in a similar way based on their own core beliefs (Beck, Rush, Shaw, and Emery, 1979). Within a set of similar situations, the individual’s core beliefs trigger automatic thoughts, which in turn trigger the individual’s emotional and behavioral response. Over time, the individual’s responses to similar situations become more consistent, thereby causing the development of a routine response to these types of situations. As this consistently occurs, the schema connected to particular type of event is further developed and the individual’s assertion that the belief holds absolute truth is strengthened (Beck, Rush, Shaw, Emery, 1979). Beck’s theory underlying CBT focuses on the idea that symptoms of depression, as well as those of other psychological disorders, are developed and maintained through to the individual’s negative core beliefs and triggered negative thoughts. In addition to the individual’s negative schemas, Beck’s theory states that the cognitive triad of negative cognitions of self, others, and future is further perpetuated through patterns of faulty thinking (Beck, Rush, Shaw, Emery, 1979). There are a variety of faulty thinking mechanisms that are used by individual’s to support their automatic thoughts and core beliefs, even in light of contradictory evidence (Beck, Rush, Shaw, Emery, 1979). This type of thinking can be characterized as labeling, over generalizing, personalization, emotional reasoning, magnification or minimization, and all-or-nothing or impetrative thinking (Beck, 1995). These cognitive errors are often extreme and unrealistic ways in which the individual assesses and draws conclusions regarding their problems, which is then used to further support their negative belief system and automatic thoughts. CBT theory declares that the individual can learn to identify their automatic thoughts, thereby creating an avenue for changing the emotions, behaviors, and psychological responses to various situations. When utilizing CBT with a client, it is necessary for the therapist to conceptualize the individual’s presenting problems from the perspective of the cognitive model (Beck, 1995). This can be done through the work of gathering information regarding the individual’s current problems, diagnosis, and how the problems have been developed and maintained. As this information is collected, the CBT therapist begins to assess and identify the inaccurate and unhelpful thoughts connected to the problems, and the behaviors that are exhibited as a result of this thinking (Beck, 1995). As this is done, the therapist can then begin to guide the individual to identify, examine, and correct or modify the negative automatic thoughts, underlying core beliefs, and faulty thinking mechanisms that have sustained the presenting problems (Beck, 1995).

Wednesday, August 21, 2019

Home Alarm System: An analysis

Home Alarm System: An analysis Home burglaries and property trespassing is a common event; more than forty per one thousand households get robbed yearly. With the introduction of home alarm systems the rates of burglaries have dropped significantly for the past thirty years. Therefore, throughout the semester, we have been working on building a functional home alarm system using PIC microcontroller, a keypad, an LCD display and a magnetic sensor. Household burglary is defined as an illicit entry or attempted entry of a residence which usually involves theft. The illegal entry may be by force, such as breaking a window or slashing a screen, or may be without force by entering through an unlocked door or an open window. As long as the person entering has no legal right to be present in the structure a burglary has occurred. Furthermore, burglary is not only the entry of the house by itself; illegal entry of a garage or any other structure on the premises also represents household burglary. [12] Figure1.Home Burglary Statistics (2008-2011).Washington Post [Photograph].Retrieved from http://homesecurity.net/home-burglary-statistic/ The most common targets are residential houses. Those of them without security systems installed are about three times as likely to be broken into as homes with security systems installed. Moreover, the first place that the robber will search is usually the master bedroom because most people keep their valuables there. The preferred items to be stolen are cash, jewelry, electronic equipment, silver, guns and other items easy to put on the market. [8] Statistics showed that every 14.6 seconds, a burglary takes place in the United States and most of them occur between 10 am and 3 pm. Burglars spend an average of 8 to 12 minutes in your household. The residence owner can take the following safety measures such as: burglars search for homes that appear to be vacant; robbers want to waste no more than sixty seconds breaking into a home. [8] Points of Entry of Burglars: Figure2 .Burglary Facts and Statistics (2008). [Photograph]. Retrieved from http://www.articlesbase.com/home-and-family-articles/burglary-facts-and-statistics-338161.html One survey in Pennsylvania showed that: 81 percent of residential intrusions occur through the first floor. 34 percent of burglars entered through the front door; 23 percent through a first-floor window; 22 percent through the back door; 9 percent through the garage; 4 percent entered through a basement; 4 percent through an unlocked entrance; 2 percent through a storage area; 2 percent entered anywhere on the second floor. [2] Definition of a Home Alarm System: A home alarm system is used as a defensive device to monitor all unwelcome events such as intrusion, glass breaking and mainly to avoid theft. It is also used to alert a user of a possible danger. It focuses on all of the accessible entry points of the house, so that the alarm will sound as soon as the intruder enters. Advantages: The most important advantage of the home alarm system is the security it offers from theft of costly things such as the jewelry, the television set, your pc, cell phones, and etcà ¢Ã¢â€š ¬Ã‚ ¦ causing massive financial problems. In addition, a home alarm system is necessary not just for the material possessions in your home but also increases protection on the family. Furthermore, a burglar may want to break the door of your house while barging in. You also might have to cope with broken windows, smashed furniture and other general damage. Making up for this damage will be expensive not just time wise but also requires great deal of effort since burglars these days are interested in expensive items. They search for important identifications such as your bank statements, passports, and credit cards, essentially whatever they get their hands on. The misuse of these documents will disturb your economic balance. [13] Therefore, it is recommended to install a home alarm system at your pl ace. Disadvantages: One of the main disadvantages and is mainly caused by a malfunction is the generation of a false alarm where it can be triggered accidentally and thus cause unnecessary inconvenience. Moreover, having children might cause a lock of the system by improper insertion of the password. Also, if you failed to insert the password in time, the alarm may be triggered. Some burglars are highly experienced and have the knowledge to disable the alarm, the phone lines, and the electricity leaving you helpless in a critical situation. How Does a Home Alarm System Operate? Sensors are the most vital part of the system; they act like the eyes and ears of a home alarm system by monitoring break in points and interior areas. The typical sensors, which are usually two magnets, are generally installed on doors and windows such that one magnet is connected to the door or window and the other is connected to the door or window frame. When the door or window is opened, one magnet is removed from the surrounding area of the other and the sensor registers that the door has been opened. More advanced home alarm systems may also contain vibration sensors to detect when glass has been broken by measuring the vibrations caused by the breakage. Also, many systems use motion sensors that compute the proximity of a rooms walls by producing infrared beams and measuring the time required for them to bounce back; if a beam comes back sooner than expected, it likely bounced off of a person and the sensor registers motion. [4] When the alarm system is installed, each sensor is registered with the control panel either through wires or wirelessly. The control panel also interfaces with keypads and other input devices used by the home owner to control the system. The control center keeps track of the status of the sensors and reports activity through LCD displays and other output devices. Moreover, when activity takes places, such as the opening of a window, the sensors report the activity to the control center and the center registers that a disturbance has occurred. In managed alarm systems, the control panel also checks the sensors to verify that they are still operational; if a sensor fails to reply, the center alerts the home owner of an out of order sensor. If the home owner activates the alarm system and the control center registers activity in the home, a signal is sent by the control to a buzzer, flashing lights or any other audiovisual alarm element. Types of Alarm Systems: Home burglar alarms normally include the following: Window and door sensors Motion detectors Main control panel Centrally located keypad Exterior security signs Hard-wired or wireless construction These systems are often centrally monitored by a security provider that alerts authorities of break-ins. Some of the more common systems that are included in many homes: Smoke alarm systems include smoke detectors, possibly strobe lights and hearing impaired features for seniors and hearing impaired home owners. Fire alarms include a series of smoke detectors, heat detectors and possibly an in-home sprinkler. One ignored aspect of your home security is your homes built in systems, such as heating and cooling and plumbing. Critical System Alarms include: Cooling and heating alarms have detection and monitoring devices that transmit information about your heating and cooling system often directly to a monitoring company. Flood and water alarm systems monitor your plumbing system where even small leaks can go unnoticed and result in thousands of dollars in repairs. [5] Types of Alarm Sensors: Alarm Sensors are essential elements of your home security system. A wide variety of security alarm sensors and detectors are available for use. It is obvious what most sensors do, so we will only describe the main ones used in a basic system. Contact Sensors: Most burglaries involve doors, either on entry or while leaving the house. So protecting all doors is a must. (Example: magnetic circuit breakers).Door contacts may be hardwired or wireless; hardwired contacts are usually buried in the doorframe, which is less obvious than wireless and are preferable. Window Contacts: Can be hardwired or wireless. Motion Sensors: Its the most essential and common form of protection. Passive infrared sensors: Detect motion by sensing a sudden change in heat. Dual-Tech motion detectors use two different technologies in the same unit: passive infrared and microwave. These devices are designed to avoid false alarms since both technologies must detect motion before setting off the alarm. Photoelectric Sensors: These sensors project a beam of light across a hall or doorway to detect motion and are triggered when a person passing through interrupts the beam. Glass Break Detectors: Usually mounted near windows to detect the specific high frequency sound of glass being shattered. They are usually installed on a wall opposite or adjacent to the protected glass and are effective within about 15 to 25. Smoke and Heat Detectors: Detect smoke and heat. [1] Chapter II: Our Home Alarm System Our Home Alarm System: Our projects main concern was to build a Home Alarm System using a PIC microcontroller. We started off our project by coding the Keypad, then LCD and the final touch was the sensor. We also added two types of buzzers: one to sound the alarm and the other as a key tone buzzer. The final result turned out to be the following: Figure3. Our Home Alarm System Materials Used: Cost: PIC16F877A 7$ 4X4 Keypad 2$ JHD 162A LCD 6$ 6V Alarm Buzzer 0.5$ Key tone Buzzer 0.5$ 4 MEGA Crystal Oscillator 5$ 3 Flashing LEDs 0.1$ 9 Resistors (10Kà ¢Ã¢â‚¬Å¾Ã‚ ¦, 470 à ¢Ã¢â‚¬Å¾Ã‚ ¦, 1Kà ¢Ã¢â‚¬Å¾Ã‚ ¦) 0.1$ 18 Pico Capacitors 1$ Magnetic Sensor 2$ Input Voltage Wires 0.1$ Breadboard 3$ Total Cost: 27.3$ Process of Building: First of all the PIC: PIC is a family of Harvard architecture microcontrollers. The name PIC refers to Peripheral Interface Controller. They are popular with both professional developers and hobbyists alike due to their low cost, wide availability and large user base. The PIC has an overall of 40 pins. These pins include input/output ports such as PORTA, PORTB, PORTC, PORTD, PORTE and two Vdd ports for input voltage. The PIC architecture is characterized by its multiple attributes: Separate code and data spaces (Harvard architecture). A small number of fixed length instructions. Most instructions are single cycle execution, with one delay cycle on branches and skips. All RAM locations function as registers as both source and destination of math and other functions. A hardware stack for storing return addresses. Data space mapped CPU, port, and peripheral registers. The program counter is also mapped into the data space and writable. There is no distinction between memory space and register space because the RAM serves the job of both memory and registers, and it is usually just referred to as the register file. The keypad: This device is used to enter the password selected by the user and to arm or disarm the alarm by selecting the various profiles installed in the system. As you can see from our projects picture we used a 4 x 4 keypad, as instructed by Dr. Ayoubi we started off our project by working on the keypad and testing it on Proteus and on the PIC itself. The design of a 4 x 4 keypad can be approached by either adopting the serial or the parallel concept. The serial concept is tedious in terms of software effort, complex in circuitry and slow in response. However, it requires few interface lines. Meanwhile, the parallel concept on the other hand is less complex in circuitry, less software intensive and faster in response. Its concept also requires more interface lines, that is, 8 plus an interrupt line for a 4 by 4 keypad. [10] Our design for a functional keypad was the usage of an alternation of ports between inputs and outputs which is done by using the TRIS function. We started off by setting the first four ports of PORTB as the inputs and the latter four ports as the outputs. This is done by moving the binary literal 11110000 to the working registers and having the latter four ports pulled down by 10kà ¢Ã¢â‚¬Å¾Ã‚ ¦ resistors. The first four ports are connected to the columns meanwhile the last four are connected to the rows. Moreover, as a justification for this reasoning is the fact that it is required to scan the columns for the pressed key and then scan the rows and the results will be decoded in a decoder telling us which button of the keypad was pressed. The main functionality of the keypad as mentioned earlier is to set the code. The alarm can be armed and disarmed with a standard four digit user code in our case. The master code is a step above a regular user code. It is used to unlock the system, as well as programming or erasing a regular user code. Theoretically it can also be used to bypass some sensors. The default password set during the design, which is also the installation code, is 1234. Most alarm companies use the same installer code for all of their installations, and the vast majority will never give their installer code to a customer, for obvious reasons. LCD (Liquid Crystal Display): An LCD is a thin, flat electronic visual display that uses the light modulating properties of liquid crystals (LCs). They are used in a wide range of applications, including computer monitors, television, instrument panels, etc. They are common in consumer devices such as clocks, watches, calculators, and telephones. Liquid crystal displays (LCDs) offer several advantages over traditional cathode ray tube displays that make them ideal for several applications. Of course, LCDs are flat, and they use only a fraction of the power required by CRTs. They are easier to read and more pleasant to work with for long periods of time than most ordinary video monitors. It also has few disadvantages, such as limited view angle, brightness, and contrast, not to mention high manufacturing cost. As research continues, these limitations are slowly becoming less significant. [6] [11] [14] In our design, we used a 1k resistor to set the contrast at the LCD display. Sensor Used: The sensor used is the typical magnetic switch circuit breaker as shown in the figure below: Figure4. How Burglar Alarms Work. Retrieved from http://home.howstuffworks.com/home-improvement/household-safety/security/burglar-alarm1.html A magnetic sensor is used to detect any changes as well as disturbances in a certain magnetic fields. In addition, when the magnets are separated it means we have an open circuit and when it is closed it acts like a short circuit. When the door is closed, the magnet pulls the metal switch close so the circuit is complete. Then, the current powers the relays electromagnet, so the buzzer circuit stays open. When you move the magnet by opening the door, the spring snaps the switch back into the open position. This cuts off the current and closes the relay, sounding the alarm. [7] Functionality of our system As soon as we connect the 5V power source the alarm greets us with a welcome message displayed on the LCD then asks us to provide the password. Once entered correctly the green LED flashes accepting the code. If the password entered was incorrect the red LED flashes and the system gives you two further chances to enter the correct password. If both remaining attempts failed the system will lock. The only way to unlock the system is by clicking the star key (*) for more than five seconds. This feature should be kept a secret between the user and the company otherwise anyone who knows it can unlock the system and keep trying to hack into it. The keypad should be installed next to the entry door because it is programmed with a time lag, to permit you to exit when leaving, and enter on arriving home, without activating the alarm. We have set a profile that gives you 20 seconds before leaving the house and the alarm starting. By clicking the (A) button on the keypad the counter starts giving you the amount of time to leave the house. If the magnets of the magnetic switch get separated, by the opening of a door or a window (depending on where it is installed), the internal invisible counter gives the user 15 seconds or 3 trials to set the password correctly or the alarm will go off. The alarm will remain firing until the password is set correctly. Furthermore, the option of changing the password is also available. In order to do so insert an incorrect password and the red LED flashes. While it is blinking click on the star button and wait until the yellow LED blinks and the LCD displays INSERT ADMIN PASS. In our system the administrator password is 5678. After inserting the correct administrator password the system will ask you to insert the new password then once again for confirmation. The administrator password however cannot be changed unless we change it in the code and download it again on the chip. Chapter III: Algorithm Design Block Diagrams: Figure5. Block Diagram showing how the system functions Figure6. Block Diagram showing how the keypad functions Proteus: Figure7. Our Design on Proteus Chapter IV: Conclusion References Conclusion: As we have seen in the graph Burglary rates figure7, the alarm system is becoming a must in modern day life in order to protect our valuables and the ones we care about. As we can see from the graph below, the rate of burglary is declining in 1981 that is when technology started evolving greatly and as we can see with time crime kept on decreasing. Figure7.Key Facts at a Glance (2011).Retrieved from http://bjs.ojp.usdoj.gov/content/glance/burg.cfm Figure8.Certified Security Systems (2010). Retrieved from http://certifiedsecuritysystems.com/crime-statistics.aspx In flow chart figure8, alarms are moderately effective (57%), 40% very effective, and 3% not effective as owners say. Alarm owners are very satisfied with price and value of security systems such that 74% excellent and good, 22% just okay, and 4% Poor and Terrible. In conclusion, comparing our cost to the prices on the market we can see that systems cost from 30$ to 200$ depending on the number of sensors, the ground it covers and its specifications. Therefore, we recommend each house owner to buy an alarm system because it is not very expensive and might save you the trouble and the inconvenience and the financial losses caused by a robbery. REFERENCE LIST [1] Alarm SensorsAre Essential and Primary Elements of Your Home Security System (n.d.). Retrieved January 19, 2011 from http://www.home-security-action.co.uk/alarm-sensors.html [2] Burglary Facts and Statistics (2008).Retrieved January 19, 2011, from http://www.articlesbase.com/home-and-family-articles/burglary-facts-and-statistics-338161.html [3] Certified Security Systems (2010). Retrieved January 20, 2011 from http://certifiedsecuritysystems.com/crime-statistics.aspx [4]Evans, K. (n.d.). How Does a Home Alarm System Operate? Retrieved January 18, 2011 from http://www.ehow.com/how-does_4568395_home-alarm-system-operate.html [5] From Burglar Alarms to Fire Alarms (2008-2011). Retrieved January 19, 2011 from http://homesecurity.net/security-alarms/ [6] Gowan, M. (2000). How it Works: LCD Monitors. Retrieved January 20, 2011 from http://www.pcworld.com/article/15112/how_it_works_lcd_monitors.html [7] Harris, T. (n.d.). How Burglar Alarms Work. Retrieved January 20, 2011 from http://home.howstuffworks.com/home-improvement/household-safety/security/burglar-alarm1.html [8] Home Burglary Statistics (2008-2011).Washington Post. Retrieved January, 19, 2011, http://homesecurity.net/home-burglary-statistic/ [9] How Hard Wired Home Alarm Systems Its Add On Components Work! (n.d.). Retrieved January 20, 2011 from http://www.top-home-security-info.com/home-alarm-systems.html [10] Interrupt Driven 44 Keypad (n.d.). Retrieved January 19, 2011 from http://priorartdatabase.com/IPCOM/000005778 [11] Introduction to Liquid Crystal Displays (n.d.). Retrieved January 19, 2011 from http://plc.cwru.edu/tutorial/enhanced/files/lcd/intro.htm [12] Key Facts at a Glance (2011).Retrieved January 19, 2011, from http://bjs.ojp.usdoj.gov/content/glance/burg.cfm [13] Krejcik, R. (2010). Advantages of a Home Alarm System. Retrieved January20, 2011 from http://www.realestateproarticles.com/Art/30563/271/Advantages-of-a-home- alarm-system.html [14] LCD (2011). Retrieved January 20, 2011 from http://www.webopedia.com/TERM/L/LCD.html

Tuesday, August 20, 2019

Intellectual Property Rights

Intellectual Property Rights Intellectual Property Rights Intellectual property can be instrumental to the value of any business. The ability to protect a business or an individuals ideas, inventions and original processes is something that is considered essential to many establishments, particularly those that rely on innovative ideas and products as their unique selling point. Intellectual property rights span a wide range of situations and products, although the most common rights are designs, copyright, patents and trade marks. Each of these intellectual property rights aims to protect a different area of invention. Copyright protects works such as art or music; design protects the physical appearance of a product; trade marks protect the way in which a trader separates himself from his competitors; and patents protect the method by which a product is technically made up and functions. This latter category of intellectual property right can cause considerable difficulty to those applying for protection and those attempting to enforce existing rights. Technology and the associated functions are changing constantly and often being tweaked or altered to meet a new requirement. At what point does this become patentable and distinct from the original technology? This requirement to be innovative in some way is the subject of much debate. Determining when that extra step results in a new protectable technological item is the key to ensuring that the correct items are offered protection. Courts have grappled with the relevant issues in determining whether or not a patent should be protected and when an attack on validity should be successful. Throughout the years, various tests have been forwarded by the courts; however, consistency in relation to obviousness and the concept of novelty and invention have proved particularly troublesome and are often hotly debated in court proceedings. Elements of Patent Law Before determining the way in which the courts deal with the issues surrounding obviousness and novelty, it is first important to gain an understanding of what must be established in order to establish a valid patent, successfully. The basic definition of what is patentable is contained in Section 1(1) of the Patent Act 1977 (the Act). This Act states that in order to be patentable the invention must be new, must involve an inventive step and be capable of industrial application. The Act then goes on to consider each of these requirements, in more detail. Section 2 deals with the requirement that the invention is new. This requirement is commonly referred to as the novelty requirement. Section 2(1) states that for an invention to be novel or new it must not form part of the state of the art. Section 2(2) goes on to consider what state of the art actually encompasses. It defines state of the art as any matter (i.e. product, process, etc. ) that has previously been made available to the public by either a written or oral description. Simply put, if the invention has already been made available to the public, it is not going to be eligible for patent protection. When determining whether or not an invention is new or novel, the issue of whether or not it has been made available to the public will become central. The invention, in order to be considered in the public domain, must have been disclosed to at least one member of the public, who could if he wished use the information freely and the disclosure had to be sufficiently enabling. Sufficiently enabling means that the information contained must be such that someone who has a reasonable level of skill in the area to which the invention relates would be able to implement and make use of the disclosure. The disclosure must be in relation to one document (or one document with several others interlinked) and cannot simply be disclosure obtained from a mosaic of documents. There are exceptions to this rule in relation to disclosure that allow a patent still to be established where the disclosure has been made within six months of the patent application and has been done in confidence. Pulling these factors together, it is clear that the need for novelty insists on the patent being completely new and innovative. Although, based on the mosaic rule, the collection of previous documents and information to create a new invention will not be barred from receiving patent protection. The Issue of Novelty From looking at the above breakdown of what an individual has to prove in order to establish a valid patent, it is clear to see that the issue of novelty is central to most patent decisions. The Section 2 requirement for novelty contained in the Act is a corresponding provision of Articles 54 and 55 of the European Patents Convention (1973) (EPC). As a general rule, an invention is not novel if the amalgamation of features has already been anticipated in a previous disclosure. This point was considered in detail in the case of SmithKline Beecham Plcs Patent [2006] RPC 10. In this case, it was held that for there to have been that degree of anticipation, there must firstly have been a disclosure and there must secondly have been the element of enablement. That is, based on the disclosure, the suitably skilled individual receiving the details of the process would have been able to replicate the process disclosed. Pulling together both of these elements will allow the court to decide whether or not the patent before them is novel or not. Let us first consider the element of disclosure. When it comes to determining whether or not the specific invention has been previously disclosed, the question is not whether the prior disclosure was for an item of similar utility, i.e. it does not necessarily have to solve exactly the same problem as the current invention. In deciding this matter, courts have stated that in order to be a conflicting patent, the situation previously disclosed must be so close to the new invention that the utility gained by the new invention would be a practical certainty. This suggests that in order to establish a valid objection to a patent application on the basis of a prior disclosure, it would have to be shown that the prior invention was inextricably linked in terms of function to the new invention. Therefore, even if something similar has been previously disclosed, provided it is not close with the degree of inevitability that is required, the patent application will not necessarily fail on the basis of not being novel. A general disclosure of a possible process does not impact on the novelty of an invention; however, where there is a series of processes, each individual process could be the reason for a future patent application failing, due to lack of novelty. Secondly, there is the element of enablement. This means that whatever has been disclosed must be sufficient for a person, skilled in the relevant art, to copy or replicate the process or invention. This enablement provision should be thought of separately to the disclosure, as in the case of disclosure the information must be sufficient for a skilled individual to understand the disclosure. For the purpose of enablement, the skilled person must be capable of actually utilising or at least trying to utilise the relevant invention. When it comes to determining whether or not the invention is novel, therefore, several issues need to be considered. It is not simply a matter of determining if something similar has ever been made public. It must have been made public with sufficient clarity as to allow the invention to have been understood and put into effect by another third party. The patent, therefore, in order to gain protection, must offer a solution to a situation that has not been possible to achieve before and not simply a fanciful possibility of a solution given enough further experimentation. As stated in the case of General Tire Rubber Co. v Firestone Tyre Rubber Co. Ltd, the disclosure must contain clear and unmistakable directions to do what the patentee claims to have invented. Pharmaceutical Application The pharmaceutical industry as a whole has been one of the most litigated and dynamic areas in relation to the test of novelty. The recent case of Actavis UK Limited v Merck Co. Inc changed the way in which UK courts look at the test of novelty in relation to medical products. Prior to the Actavis case, it was thought that a new dosage or way of taking a particular drug could not be seen as novel; this has now been reversed by the Court of Appeal. In this case, it was held that a new regime for taking medicine could constitute a novel invention for the purpose of obtaining a valid patent. Furthermore, the court dealt with the issue of obviousness, stating that it had to be obvious at the date of priority, not before or after, to defeat the patent, on this basis. The leading case of Merrell Dow v. Norton and Penn, commonly referred to as the Terfenadine decision, held that when looking at a pharmaceutical process the definition of new had to be applied to the actual processes and not to a new result or outcome. In this case, it was held that although Merrell had discovered a new reaction from Terfenadine, it was not novel as the composition had previously been disclosed to the public (albeit not for that specific purpose). This produces an interesting position. Based on this judgment, it would seem that whether or not the process or invention produces a solution for a previously unsolvable issue is irrelevant; the issue is whether the actual matter itself has been disclosed. The focus of the test is on the physical items and not on the resulting outcome. Bearing this decision in mind and the way in which the courts have chosen to deal with pharmaceutical claims, it would seem impossible to conclude that the issue of patentability is based purely on finding a solution for a technical problem that could not be solved before. Obviousness This leads us on to consider how important the actual resulting process or invention is to the determination of whether or not it is patentable. Aside from the requirement of novelty, the process or invention must involve and innovative step. This has been interpreted to mean that the invention would not be obvious to someone skilled in the art when presented with the relevant matter. One of the ways in which this test has been interpreted is to consider whether or not it fills a gap in the market, thus becoming an immediate business success. If this is the case, it is more likely that the invention would be seen as non-obvious and, therefore, patentable. The requirement for this inventive step is contained in Section 3 of the Act. Deciding on what exactly is obvious and what is not has been a matter for the courts. In the case of Windsurfing International Inc. v Tabur Marine (Great Britain) Ltd, the main test for obviousness was laid down and remains the starting point for judges when deciding whether or not the invention is obvious. It was held that the court should take a four stage approach. Firstly, it should look at the inventive step itself in isolation, i.e. separating it from any supplementary aspects of the invention. Secondly, once the court is clear what the inventive step in question actually is, it should put itself in the position of the common person, skilled in the relevant art with the knowledge that was available at the date of priority. Thirdly, the court needs to consider the difference between what is known by the common man and what the invention professes to display. Finally, the court needs to determine whethe r the step between what is known and the invention would have been obvious to the common man. For example, in the case of Sabaf SpA v. MFI Furniture Centres Limited and others, the House of Lords considered the issue of whether the gas burner in question was obvious. In this case, the argument that Sabaf was presenting to the court was that its patent for a gas burner had been infringed. The respondents (MFI and others) claimed that they were using a new invention as it was, in fact, the combination of two inventions that had generated their specific gas burner. The crucial point here was that it was not possible to take two existing inventions and put them together to establish a new invention, where this new invention would be the obvious product of the two original inventions. The test for being obvious seems to be reasonably wide with the court requiring a definite inventive step and not simply a natural progression, even if the natural progression is novel. Conclusions The area of patent law and, in particular, determining whether or not an invention is novel and / or obvious is by no means clear. The courts take a very individual approach to each case as it is presented to them based on the individual facts. Despite this, it seems that both elements, i.e. novelty and obviousness, remain instrumental. It is not true to say that provided an invention is novel it does not matter whether or not it is obvious. The courts have widened their view of obviousness but not so far as to remove it entirely. Therefore, if the patent in front of the court fails the test of obviousness and a person skilled in that specific area could have also established the invention it would fail, regardless of how novel the invention turns out to be. Both tests must be suitably established in order to gain patent protection. Producing a solution to a problem is highly important to the decision, but it is not the only deciding factor. The issue of obviousness simply cannot be ignored. Bibliography (14 required) Bagley, Margo A. , Patent First, Ask Questions Later: Morality and Biotechnology in Patent Law, William and Mary Law Review, Vol. 45, 2003 Bainbridge, David I. , Intellectual Property, Pearson Education, 2006, Pages 374 407 Colston, Catherine, Principles of Intellectual Property Law, Cavendish Publishing, 1999, Pages 86 105 Cornish, William Rodolph, Vaver, D. , Bently, Lionel, Intellectual Property in the New Millennium: Essays in Honour of William R. Cornish, Cambridge University Press, 2004, Pages 91 95 Grubb, Philip W. , Patents for Chemicals, Pharmaceuticals, and Biotechnology: Fundamentals of Global Law, Practice, and Strategy, Oxford University Press, 1999 Hodkinson, Keith, Protecting and Exploiting New Technology and Designs, Taylor Francis, 1988, Pages 32 71 Johnston, Josephine, Wasunna, Angela A. , Patents, Biomedical Research. And Treatments: Examining Concerns, Canvassing Solutions, The Hastings Center Report, Vol. 37, 2007 Karet, Novelty under English Law. Appeal in Merrell Dow v Norton 16(5) European Intellectual Property Review 204, 1994 Muir, Ian, Brandi-Dohrn, Matthias, Gruber, Stephan, European Patent Law: Law and Procedure under the EPC and PCT, Oxford University Press, 1999 Patterson, Mark R. , Contractual Expansion of the Scope of Patent Infringement through Field-of-Use Licensing, William and Mary Law Review, Vol. 49, 2007 Pressman, David, Patent It Yourself, Nolo, 2008, Pages 15 20 Taylor, Christopher Thomas, Silberston, Aubrey, The Economic Impact of the Patent System: A Study of the British Experience, CUP Archive, 1973, Pages 12 23 Thomas, John R. , Litigation beyond the Technological Frontier: Comparative Approaches to Multinational Patent Enforcement, Law and Policy in International Business, Vol. 27, 1996 White, The Novelty-Destroying Disclosure: Some Recent Decisions 9 European Intellectual Property Review 315, 1987